Mylar® brand Film or Polyester Film is ideally suited for a wide range of uses such as packaging, printing, die-cutting, electronics, protective overlay, barrier protection, apparel and other industrial applications. Because of Mylar® brand Film or Polyester Film inherent physical properties, it’s your best choice for a high performance plastic film/sheet.
Physical Properties |
Properties |
Typical Value |
Units |
Test Method |
Tensile Strength (MD) |
28,000 |
psi |
ASTM-D882 |
Tensile Strength (TD) |
34,000 |
psi |
ASTM-D882 |
Strength Elongation MD |
15,000 |
psi |
ASTM-D882 |
Strength F-5 TD |
14,000 |
psi |
ASTM-D882 |
Modulus MD |
710,000 |
psi |
ASTM-D882 |
Modulus TD |
740,000 |
psi |
ASTM-D882 |
Elongation MD |
115 |
% |
ASTM-D882 |
Elongation TD |
92 |
% |
ASTM-D882 |
Surface Roughness |
38 |
nm |
Optical Profilometer |
Density |
1.39 |
g/cc |
ASTM-D1505 |
Viscosity |
0.56 |
dL/g |
ASTM-D4603 |
Yield |
21,000 |
in2/lb |
n/a |
|
Electrical Properties |
Properties |
Typical Value |
Units |
Test Method |
Dielectric Strength |
AC, 20º C, .00092″ |
7,000 |
volts/mil |
ASTM-D149-64 |
Dielectric Constant |
25º C, 1kHz |
3.2 |
n/a |
ASTM-D150-81 |
Dissipation Factor |
25º C, 1kHz |
0.005 |
n/a |
ASTM-D150-65 |
Volume Resistivity |
25º C |
1.00E+19 |
ohm-cm |
ASTM-D257-78 |
Corona Threshold |
|
V-AC |
V-AC |
ASTM-D2275-80 |
|
Thermal Properties |
Properties |
Typical Value |
Units |
Test Method |
Melting Point |
254 |
º C |
n/a |
Dimensional Stability |
n/a |
n/a |
n/a |
at 105º C MD |
0.6 |
% |
n/a |
at 105º C TD |
0.3 |
% |
n/a |
at 150º C MD |
1.8 |
% |
n/a |
at 150º C TD |
1.0 |
% |
n/a |
Specific Heat |
0.28 |
cal/g/º C |
n/a |
Thermal Expansion |
1.7 x 10-5 |
in/in/º C |
ASTM-D696 |
UL94 Flame Class |
94VTM-2 |
n/a |
Slow to self
extinguishing |
|
Polyester Film has a variety of different applications. Click here for more information.
Grafix Plastics offers a wide variety of different types, grades, finishes and thicknesses. Click here for more information on Grafix Plastics Polyester Film Products.
Ready to talk with us?
Please click the start an inquiry button, and we’ll help you solve your plastic materials problems.
Mylar® is a registered trademark of Dupont Teijin Films. Only Dupont Teijin Films makes Mylar®. Grafix Plastics stocks some Mylar® brand products so please contact us for more information.