LaserPro™ Laser-Cuttable Film

Need to get something quickly? We’ve got you covered with materials in stock and ready to go.

Raw materials

Finished Goods

Custom sizes and configurations of laser-cuttable film are available with certain minimum quantities ordered.

Properties are based on .005″/125um general use Duralar polyester film base, because that is what LaserPro is made from. Properties of other gauges and finishes of LaserPro film can vary.

General DuraLar Spec Sheet

Film Property			Value	Units	Test Method
Physical Properties
	Tensile Strength (MD)		28,000	psi	ASTM D 882
	Tensile Strength (TD)		34,000	psi	ASTM D 882
	Strength Elongation MD		15,000	psi	ASTM D 882
	Strength F-5 TD		14,000	psi	ASTM D 882
	Modulus MD		710,000	psi	ASTM D 882
	Modulus TD		740,000	psi	ASTM D 882
	Elongation MD		115	%	ASTM D 882
	Elongation TD		92	%	ASTM D 882
	Density		1.39	g/cc	ASTM D 1505
	Viscosity		0.56	dL/g	ASTM D 4603
Electrical Properties
	Dielectric Strength
		AC, 20°C, .00092″	7,000	volts/mil	ASTM D 149-64
	Dielectric Constant
		25°C, 1 kHz	3.2		ASTM D150-81
	Dissipation Factor
		25°C, 1 kHz	0.005		ASTM D150-65
	Volume Resistivity 25°C		1.00E+19	ohm-cm	ASTM D257-78
	Corona Threshold		425	V-AC	ASTM D2275-80
Thermal Properties
	Melt Point		200
	Service Temperature Range		-70-150	C
	Dimensional Stability
		at 105° MD	0.6	%	Measured Shrinkage
		at 105° TD	0.9	%	Measured Shrinkage
		at 150° MD	1.8	%	Measured Shrinkage
		at 150° TD	1.1	%	Measured Shrinkage
	Specific Heat		0.28
	Thermal Expansion		1.7×10-5		ASTM D 696
Optical Properties
	Transmission Visible		> 88	%
	Transmission Near IR		>80	%
	Haze		<1	%
	Refractive Index		1.65	RI
Chemical Properties
	Resistance by Class
		Acids	Good
		Bases	Good
		Solvents	Excellent
		Detergents	Excellent
		Oils	Good
	Permeability
		Water Vapor	0.1	g/100 in2/24hr.	ASTM E-96
		Carbon Dioxide	16	g/100 in2/24hr.	ASTM D1434-58
	Moisture Absorption		<.8	%	ASTM D-570-63
	Stain Resistance		Most Household Agents & Chemicals

Table from Product Spec Sheet XLS

For more specific questions regarding DuraLar Film or LaserPro Film, please contact your sales representitive today!

Important Notice:  Grafix makes no warranties, express or implied, including but not limited to any implied warranty of merchantability of fitness for a particular purpose.  The user is responsible for determining whether the Grafix product is fit for a particular purpose and suitable for the user’s method of application.  Please remember that many factors can affect the use and performance of a Grafix Plastics film product in a particular application.  Given the variety of factors that can affect the use and performance of a Grafix product, some of which are uniquely within the user’s knowledge and control, it is essential that the user evaluate the Grafix product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.

Limitation of Remedies and Liability:  If the Grafix product is proven to be defective, THE EXCLUSIVE REMEDY, AT GRAFIX’S OPTION, SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE GRAFIX PRODUCT. Grafix shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence, warranty or strict liability.